This RF sampler covering 0.5 - 80MHz will provide a sampled output at -50dB relative to the input power. It can handle up to 2kW continuous power and is perfect for checking transmitted output via a spectrum analyser, communications test set or oscilloscope.

Ideal for use with radio equipment supporting "Pure Signal" or "Digital Pre Distortion" by providing a post amplifier RF sample back to the transceiver. Please check compatibility and that the expected RF sample input level meets your equipments requirements.

• Genuine Hammond diecast enclosure
• Genuine Fair-Rite core
• HF-250 coax with silver plated copper conductor and high temperature PTFE dielectric
• High quality SO-239 connectors for RF input and output
• High quality BNC connector for sample port output
• Tested up to 2kW continuous power handling into a matched load
• Covers 0.5 - 80MHz with better than 0.1dB loss
• Sample port output -50dB

Each unit is individually calibrated and tested before shipping. Unlike most of my products, I have had to place an anti-tamper sticker on the back so I can guarantee the calibration. You are free to remove the sticker and look inside the unit but no warranty claims with regards to calibration will be accepted if this sticker has been removed or damaged.